To checker or not to checker?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Carlsen Highway
Levergunner 2.0
Posts: 487
Joined: Tue May 27, 2008 8:23 am
Location: Dunedin, New Zealand

To checker or not to checker?

Post by Carlsen Highway »

Image

Image


This is the short rifle in .44 WCF. It has colour case hardened receiver and octagonal barrel. These are fancy options and I am feeling that if the rifle has these features then it would be more natural that it should be checkered also?
I have looked at a lot of Winchester 73's and although octagonal barrels without checkering were not uncommon, one with colour case hardening as well usually would have got checkered too. Certainly all the ones with pistol grips and the same features always seem to be checkered.

It wouldn't cost me anything because I can checker a rifle stock well enough, but I am wary of doing it because I am not sure of my motivations, I don't want to do it just because I like messing around with guns, I want to do it because it would be better. I am probably overthinking this. I should probably leave it alone. But I do like good checkering on a fine rifle.

Something like this:

Image
Last edited by Carlsen Highway on Sat Apr 22, 2017 11:19 pm, edited 1 time in total.
A person who carries a cat home by the tail, will receive information that will always be useful to them.
Mark Twain
User avatar
claybob86
Senior Levergunner
Posts: 1907
Joined: Mon Apr 02, 2007 10:41 pm

Re: To checker or not to checker?

Post by claybob86 »

I think checkering would look really fine on that rifle. It's really nice as is, but checkering would add the finishing touch. IMHO.
Have you hugged your rifle today?
User avatar
Carlsen Highway
Levergunner 2.0
Posts: 487
Joined: Tue May 27, 2008 8:23 am
Location: Dunedin, New Zealand

Re: To checker or not to checker?

Post by Carlsen Highway »

I think so too.

Here is another example;

Image
A person who carries a cat home by the tail, will receive information that will always be useful to them.
Mark Twain
rossim92
Senior Levergunner
Posts: 1419
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

Re: To checker or not to checker?

Post by rossim92 »

leave it be
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Bronco
Levergunner 3.0
Posts: 895
Joined: Sat Sep 08, 2007 12:03 am
Location: Idaho

Re: To checker or not to checker?

Post by Bronco »

I think, and yes it hurts. That it is not a decision that will make it better, or worse. I feel that it is whether you like it or not that way. It's your rifle and you should have it the way YOU like it!
Just my $0.02

John
Gettin old ain't for sissies!
There just has to be dogs in heaven !
jdad
Advanced Levergunner
Posts: 3434
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: To checker or not to checker?

Post by jdad »

If that's one of the Italian reproductions, then have at it. You won't hurt or help the value.

Your gun, your decision.
I know a whole lot about very little and nothing about a whole lot.
M. M. Wright
Advanced Levergunner
Posts: 4296
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: To checker or not to checker?

Post by M. M. Wright »

Do it. Do it. Do it.

I'd move the panel on the forearm forward. The examples shown have it too far back to be useful. When shooting multiple targets fast you need that weak hand as far forward as you can get it.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
User avatar
jeepnik
Advanced Levergunner
Posts: 6831
Joined: Sun Apr 08, 2007 1:39 pm
Location: On the Beach

Re: To checker or not to checker?

Post by jeepnik »

Checkering always (if done well) an air of class to long guns. Go for it.
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: To checker or not to checker?

Post by Pete44ru »

.

Since you can do it, it NEEDS to be checkered ! :mrgreen:

Make it a Deluxe, but be sure to apply the same stock finish in the finished checkering, as is on s the remainder of the stock has.



.
Last edited by Pete44ru on Sun Apr 23, 2017 7:45 pm, edited 1 time in total.
Nate Kiowa Jones
Site Sponsor
Posts: 2507
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: To checker or not to checker?

Post by Nate Kiowa Jones »

I think it would look really nice with some fine line checkering.

But, over the years some of the uberti's have come with a faux Winchester style red wood grain finish. Underneath it may be really light colored wood. You may want to test it in the fore-woods barrel channel to see how it looks.
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
User avatar
Carlsen Highway
Levergunner 2.0
Posts: 487
Joined: Tue May 27, 2008 8:23 am
Location: Dunedin, New Zealand

Re: To checker or not to checker?

Post by Carlsen Highway »

Nate, yes that is something I have considered, and I will see how light the natural wood is. I have found some judicious use of diluted black ink into checkering will darken it to resemble a ''matured'' look like the examples I posted above
A person who carries a cat home by the tail, will receive information that will always be useful to them.
Mark Twain
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: To checker or not to checker?

Post by Blaine »

No, don't do it.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
marlinman93
Advanced Levergunner
Posts: 6432
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: To checker or not to checker?

Post by marlinman93 »

I think a gun like yours with just case colored frame as a special feature could go either way. If it had high grade wood, then checkering would be very appropriate. Or a pistol grip stock would often be checkered.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
User avatar
Carlsen Highway
Levergunner 2.0
Posts: 487
Joined: Tue May 27, 2008 8:23 am
Location: Dunedin, New Zealand

Re: To checker or not to checker?

Post by Carlsen Highway »

I just feel that a colour case hardened octagonal rifle sort of needs to be checkered, but to look at it another way, if it was a blued recever, I wouldnt think so. I am not entirely sold on the color case hardening as a feature. Overall there is something nagging me about the rifle as it is.
As an alternative to checkering, what about cold blueing the receiver black?
A person who carries a cat home by the tail, will receive information that will always be useful to them.
Mark Twain
User avatar
Borregos
Advanced Levergunner
Posts: 4756
Joined: Thu Sep 13, 2007 7:40 am
Location: Ontario, Canada

Re: To checker or not to checker?

Post by Borregos »

Go for it!!
Pete
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
olskool
Levergunner
Posts: 23
Joined: Mon Apr 10, 2017 5:16 pm

Re: To checker or not to checker?

Post by olskool »

Image here is my 44wcf with factory checkering, I like it but if it didn't have it I would not go to the expense to have it done.
User avatar
marlinman93
Advanced Levergunner
Posts: 6432
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: To checker or not to checker?

Post by marlinman93 »

Bluing over casehardened metal can lead to disastrous colors if the metal isn't annealed first! Had one I had done many decades ago that turned purple when blued! I personally would leave the gun alone. I think it looks perfect as it is.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
User avatar
Griff
Posting leader...
Posts: 20803
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: To checker or not to checker?

Post by Griff »

I've got a couple of checkered long guns... both the "pressed" and cut checkering. I normally don't care for it. It can enhance a firearm's looks, and improve it's grip capabilities. It can also be a little too much grip when new. I feel that a straight grip can either be checkered or not... but pistol grip stock always looks best when checkered.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
User avatar
OldWin
Advanced Levergunner
Posts: 8964
Joined: Fri Oct 09, 2009 2:38 pm

Re: To checker or not to checker?

Post by OldWin »

I wouldn't checker it.
If you use this rifle, and the smooth wood gets a few dings, it doesn't look bad to me. The same rifle with checkering that has flat spots and damage......ehh.
It somehow looks worse to me. Just me, though.
"Oh bother", said Pooh, as he chambered another round.
Richardx
Levergunner 2.0
Posts: 142
Joined: Wed Sep 28, 2011 11:30 am

Re: To checker or not to checker?

Post by Richardx »

Carlsen, do it and then come to Memphis I'll put you up while you do mine.
User avatar
Carlsen Highway
Levergunner 2.0
Posts: 487
Joined: Tue May 27, 2008 8:23 am
Location: Dunedin, New Zealand

Re: To checker or not to checker?

Post by Carlsen Highway »

Richard, Ive been to Memphis and I may go back one day, so your on...

Thanks all for your advice, and after considering particularly the idea that I shouldnt mess with something that isnt broke, I think I will do it anyway...I will try and copy the original Winchester checkering as best I can.
A person who carries a cat home by the tail, will receive information that will always be useful to them.
Mark Twain
User avatar
claybob86
Senior Levergunner
Posts: 1907
Joined: Mon Apr 02, 2007 10:41 pm

Re: To checker or not to checker?

Post by claybob86 »

I look forward to seeing the results! Maybe a few pictures taken during the process? :)
Have you hugged your rifle today?
Post Reply